The ABC's

After getting back in town, I've slowly started finishing up the last of the decorations, all of which I hope to have up by the end of next week (The World Cup has caused some distractions). In the meantime, I've created some ABC signs for the Missions, Crafts, Music, and Bible Study rooms. I like to have the ABC's of becoming a Christian up in all the classrooms, so each year I make some posters that fit the theme of each room. They can be downloaded below:

ABC Signs

ABC's for Bible Study Bunkhouse

ABC's for Crafts at The Blazing Star Stables

ABC's for Missions at Firefly Caverns

ABC's for Music at Campfire Creek

Please let me know if you notice any mistakes on the signs. They were created under a lack of sleep and the constant buzz of the vuvuzela horns coming from the soccer games; perfect conditions for typos! :)

The Three R's of VBS

Each year I do my best to use the three R's of VBS: Reuse, Recover, and Refurbish. The three R's help me each year to save time and, more importantly, money. Over the weekend, I went through the storage and found a few things that could be used again this year.

Cokesbury's Circle G Arch

Back in 2005, I used Cokesbury's Circle G VBS. Our church still had the arch that was sold as decoration. I removed the Circle G logo and cut out out a new logo out of cardboard. I then dry brushed it and painted the Saddle Ridge Ranch logo.

Snow Owl

I used the owl when we did Arctic Edge. I bought a basic decoy hunting owl. I bought mine at Dick's Sporting Goods for around $5 (I got a discount because he only had one eye). These are great for decorating. They can be placed about anywhere to create some faux wildlife in a room. I repainted this one to turn him into a snow owl to fit the theme of Arctic Edge. I used acrylic paint to turn him white and fake snow paint around the base. For this year's theme, this isn't really necessary. You can use him just as he is if you do not want to paint.

Tumbleweeds

I made these for last year's VBS. They are very simple to make. I bought a grapevine wreath at Hobby Lobby. I clipped the vine that held the wreath together and then unraveled the entire wreath. Since it was already in a circle, all I had to do was take the vine and twist it in different directions to create a sphere. You can take floral wire and twist it around where the vine intersects to hold it together. Mine held together on its own, so I didn't have to use the wire. I was able to get three tumble weeds out of one wreath.

Former Termite Mounds

I used Great Stuff Expanding Foam to make termite mounds for last year's VBS. I took the foam and sprayed it a pattern on wax paper. Once it was dry, I peeled it off and painted the foam. I wanted to reuse them for this years theme, so I repainted them with the same brown and black spray paints that used on my other cave rocks. Now I can use them as cave rocks in the Firefly Caverns.

Farm Bags

I made these for the bible study room with the Boomerang Express theme. I cut up burlap and sewed small sacks that could be tied at the top. I stuffed them with whatever was laying around the house. They were great to stick in corners of the classroom. This year I am going to use them in Blazing Star Stables.

Carving Out Cave Rocks

x

x

x

I wanted to have some basic carved cave rocks to mix in with the paper cave walls in the Firefly Caverns. So, I purchased a large sheet of pink insulation foam. There were several brands available at my local Home Depot. Honestly, I just chose the cheapest.

How-To

• First, I peeled off the layer of plastic coating that was on the outside of the board.
• Next, I drew out the rock shapes that I wanted to cut out of the foam.
• Then I used an x-acto knife to cut out the basic shape. The sharper the knife the better. It does make a big difference on the edges of the foam when carving. For me, this was the hardest step. After four hand surgeries, I do not have a lot of strength in my hand, so I did this step in stages to give my hand a break.
• To create the details in the rocks, I tried two different methods.
1. I took the x-acto knife and used the flat edge to scrape horizontal curved lines to create a layered look to the rock. Then I used the pointed end of the knife to scrape out deep vertical crevices throughout the rock to create cracks in the rock.
2. The other method I tried was using a wood burning tool (I kept a glass of water near by to be on the safe side. I don't have the best of luck when it comes to hot surfaces). I used the tool to create cracks and crevices across the rock. I barely touched the surface when I was drawing, because it doesn't take much pressure for the tool to burn through the foam.



Carved with X-Acto knife



Carved with Wood Burning Tool

• After carving the details, I used spray paint to finish up the rocks. I mixed a light flat tan, a glossy brown, and a glossy black. I also used a sandstone spray at the base of the rock. I have heard that the spray paint can eat through the foam. I haven't had this happen, but I would suggest testing your paint on a small surface before you paint your entire rock.

Happy rock carving!

Stalactites & Stalagmites

Since the mission room is the Firefly Caverns, the first thing I decided to tackle was some 3D stalagmites and stalactites. I wanted to be able to hang the stalactites from the ceiling, so they needed to be light weight. I decided to use Great Stuff expanding foam (found at many hardware stores).

How-To

• First find something to use as a base for building the stalactite. It doesn't really matter what it looks like, because we will be peeling it off once we're finished. I prefer wax paper and poster board .

• Spray the foam in a circular pattern or in the shape you want your stalactite (keep in mind that it expands). I would only spray a few layers at a time to keep it from collapsing. After it stiffens add a few more layers. Keep doing this until you get it to the shape that you want. Be very careful with the foam - it is very sticky, so try to keep it off your skin and clothes.

• After you have the final shape of your stalactite and it has had time to harden, spray paint it to match the colors you are using in your Firefly Cavern. I mixed a flat-base and a satin-base to give the look of moisture.

• Once your stalactite is dry, it is time to peel it off the base (this is where the wax paper comes in handy). If you used wax paper it should peel off easy. Peel carefully to make sure you don't crack your new stalactite.

• When it is time to hang them from the ceiling, take a quilting needle and feed fishing line through the eye. Find a spot on the bottom of the stalactite and feed the needle through the foam. Once your line is through, your stalactite is ready to hang in your Firefly Cavern!